|
Delcam to launch new machining options in PowerMILL at EMO
7/24/2011 |
|
|
Delcam will launch the 2012 version of its PowerMILL CAM system for high-speed and five-axis machining at the EMO World of Metalworking exhibition to be held in Hannover from 19th to 24th September. The new release will include a number of new strategies, together with more general enhancements to make programming faster and machining more efficient with the best-possible surface finish.
The most important new option is flowline machining. With flowline machining, the toolpath is divided between a pair of drive curves in a constant number of passes, rather than having a varying number of passes with a constant stepover. The toolpath will have its start and end passes on the drive curves, with the intermediate passes blending between them.
This approach gives smoother results since it ensures that each pass travels over the full length of the area, rather than leaving the part, or making major changes in direction, during the pass. It produces a better surface finish on the part and minimises wear on the cutter and the machine tool.
In PowerMILL, flowline machining can be applied across part of a surface, across a complete single surface or across multiple surfaces. In addition, intermediate curves can be added between the boundaries of the area to give even greater control over the toolpaths. These might be needed for particularly complex fillets or when machining gently-curved surfaces to a smooth finish.
PowerMILL has offered an optional module for automated machining of blades, blisks and impellors for some time. This module has now been enhanced with the addition of a spiral machining strategy. This keeps the cutter on the surface of the part for the complete operation and so gives more even tool loading and a better surface finish.
Another new option that will give better results during five-axis machining is the ability to control the angular point distribution. This option can be used to keep the machine tool moving smoothly when there is rapid angular change in one of the rotary axes of the machine tool. The problem occurs mainly when moving around sharp corners but is also important when the machine is operating near a vertical tool axis. If the machine tool is near the gimbal lock position, small movements in the tool-axis vector can result in large movements in one of the axes.
In both examples, smoother tool-axis changes can be achieved by increasing the density of the points in these areas. The user can specify the maximum angle that the tool axis can move between points. Extra points are inserted automatically to ensure the specified maximum angle is not exceeded. This gives a more even movement of the machine and so gives a better surface finish, with no risk of dwell marks. The smoother motion also reduces wear on the machine.
A more general enhancement is the ability to use Bezier curves rather than polylines when sketching geometry in PowerMILL. Bezier curves give smoother boundaries, patterns and drive curves, and so enable better quality toolpaths to be produced.
Other enhancements include more control over the clearance distances applied to the cutter and its holder. This is especially desirable when machining near-vertical faces, as a smaller clearance can be set for the shank, while still allowing a larger clearance for the holder. It allows the shortest safe cutter to be chosen, with no risk of collisions. Using shorter cutters will usually allow faster machining and minimise chatter so giving a better surface finish.
In addition, thread milling options have been added, and workplane editing, and Z-height selection and limiting, have been made easier. It has also been made easier to obtain measurements, including distances, angles and directions, from the part model and enter these values into forms automatically. Finally, the use of the PowerMILL macro language to programme repeat operation has been extended to give users more options to customise the system for their particular needs.
|
|
|
|
|
|
主站蜘蛛池模板：
最新在线中文字幕|
亚洲一二三区精品与老人|
jizzjizz亚洲|
久久永久免费人妻精品下载|
免费吃奶摸下激烈视频|
亚洲欲妇|
国产无遮挡性视频免费看|
国产亚洲无码1024|
亚洲制服丝袜在线|
亚洲国产成人av|
一区二区三区福利午夜|
国产午夜福利视频在线|
国产成人精品手机在线观看|
久9久热免费精品视频|
亚洲精品成人a|
AV人摸人人人澡人人超碰|
91精品国产无码在线观看|
狠狠撸福利导航|
亚洲二区在线观看免费视频|
成人av亚洲男人色丁香|
亚洲婷婷五月天|
jk制服白浆|
99re最新6|
亚洲欧美综合一区二区三区|
多毛老熟女|
久热超碰|
日韩一区国产二区欧美三区|
久久久久久曰本av免费免费|
国产精品亚洲二区在线播放
|
女主播扒开屁股给粉丝看尿口|
中文字幕理伦午夜福利片|
韩国三级a视频在线观看|
欧美精品亚洲精品日韩精品|
国产999久久高清免费观看|
国产精品白浆无码流出|
91纯肉无码动漫在线观看|
亚洲综合精品一区|
精品无码毛片|
久久精品女人天堂av影院|
东京热无码av|
欧美福利电影A在线播放|
