|
Husky launches HyPET® HPP5 Preform Moulding System
11/16/2013 |
|
|
- the next step in system level performance for high volume PET preform production
BOLTON, Ontario - Husky Injection Molding Systems today announced the launch of its next generation HyPET® HPP5 preform molding system. Building upon the proven technology of the HyPET® platform, enhancements have been made to HyPET® HPP5 that make it even more capable of delivering the lowest total cost to produce while providing exceptional preform quality. These enhancements allow for up to 12% productivity improvement over the previous generation system and are complemented by all new levels of production flexibility, tooling compatibility and the industry's first integrated solution for extended mold life.
"Husky is committed to offering customers the best return on their investments through continuous innovation. When developing our new HyPET® HPP5 system, we listened to what our customers were telling us and with that feedback in mind designed a system that would help them run a more competitive injection molding operation," said Robert Domodossola, Husky's Vice President of Engineering and Business Development. "HyPET® HPP5 is the result of meaningful technology refinements to many areas that combined offer the most complete and integrated injection molding system for preform manufacturing on the market today."
Cross-generation mold compatibility
Designed to satisfy the needs of customers with a large installed base of tooling, HyPET® HPP5 offers customers the ability to utilize molds from previous generation products. Simplified cross-generation mold compatibility packages make upgrading equipment easier and help to preserve valuable floor space, while allowing customers to manufacture a complete product range. In addition, a combination of technical solutions offer enhanced production flexibility, which makes the replacement of legacy assets more viable.
Improved maintenance and extended mold life
A key enhancement to the HyPET® HPP5 system is the addition of the industry's first integrated solution for extended mold life, which helps to significantly improve performance and reduce maintenance costs. Benefits include a 60% increase between required mold maintenance intervals and extended tool life up to 10 million cycles without excessive wear or flash. Sensors ensure correct mold installation and detect misalignment between mold halves during operation. If misalignment is detected, sensors signal the operator through the Polaris™ HMI and provide specific instructions to correct misalignment, allowing the vertical position of the cold half to be adjusted and the mold aligned without the use of a crane. Additional features to reduce maintenance and machine downtime include an improved procedure to align neck rings to the cavity plate and specialized anti-wear coatings that extend greasing intervals up to 120,000 cycles.
Performance and energy improvements
The CoolPik® dehumidification unit, standard on HyPET® HPP5 systems, has also been improved by replacing the desiccant wheel dehumidification and air to water heat exchanger with refrigerator combined cooling and dehumidification. The HyPET® HPP5 offers air cooling and dehumidification efficiency improvements that can yield a more than 20% reduction in energy consumption. For carbonated soft drink preform applications, when combined with better melt control and other advantages, a cycle time improvement of up to 3% can be achieved.
Improved ease of use
The latest HyPET® HPP5 is much more sophisticated, with software and hardware that have been designed to work together seamlessly. The system has undergone considerable improvements to streamline operation, including upgrades to increase automation and simplify controls. The Polaris™ HMI has been redesigned with a 19-inch full color LCD display, more intuitive layout for easier access to screens, and the ability to monitor and control auxiliaries. Operating software and menu screens have also been enhanced to simplify start-up and logic has been provided to act on the auxiliary feedback and alarms during operation. The Altanium™ temperature controller is now also fully integrated and can be controlled using the Polaris™ HMI. Further simplifying start-up and improving ease of use is Husky's patented intelligent Mold ID technology, which provides information on mold maintenance, process set-up and operation for each start-up.
|
|
|
|
|
|
主站蜘蛛池模板：
99免费精品视频|
夜夜嗨久久人成在日日夜夜|
国产精品普通话国语对白露脸|
亚洲久久色成人一二三区|
成人网中文字幕|
亚洲精品麻豆一区二区|
久久天天躁夜夜躁狠狠 ds005.com
|
中文字幕久久亚洲精品|
日本一区三区高清视频|
97精品国产手机|
亚洲激情一区二区三区视频
|
99久久国产精品无码|
久久综合九色欧美综合狠狠|
成人网站免费观看永久视频下载|
国产午夜精品理论大片|
日韩免费高清视频网站|
午夜精品一区二区三区无码不卡|
久久亚洲人成网站|
美女内射福利大全在线看
|
精品久久久久久中文字幕202|
午夜福利视频|
亚洲AV无码国产在丝袜线观看|
[无码破解]AV破解版在线观看|
牛鞭伸入女人下身的真视频|
国内精品伊人久久久久影院麻豆|
色呦呦九九七七国产精品|
午夜不卡久久精品无码免费|
国产色老妇在线精品|
美女个护士一级毛片亚洲|
无码精品黑人|
国产在线精品欧美日韩电影|
亚洲AV电影不卡在线观看|
部精品久久久久久久久|
人妻综合在线|
思思99热精品在线|
波多野结衣一区二区三区88|
亚洲成av人片一区二区|
国产又色又爽又黄刺激视频
|
国产精品制服丝袜白丝|
99re6国产精品免费视频|
国产精品一区二区三区色|
