Home > Plastic & Rubber Machinery > Plastic Injection Machinery > News



Priamus System Technologies AG


Company \| News \| Products \| Contact Us

PRIAMUS FILLCONTROL: A system for all occasions

9/12/2012

The daily problems in injection molding are diverse and range from process optimizing, monitoring and switch controls up to the control of hotrunners and the molding machine itself.

Ultimately, it is a matter of achieving the required quality as efficient and cost-efficient as possible.

For this reason PRIAMUS has decided not to provide one single system for all these purposes, but a whole range of modular components which ideally complement each other.

- The free of charge FILLCONTROL Measure module for the simple optimizing and documenting of the injection molding process

- The FILLCONTROL Monitor module as a basis for professional process monitoring

- The FILLCONTROL Switch module for the intelligent control of switching operations

- The FILLCONTROL Control-H module for the balancing and control of hotrunners and finally

- The FILLCONTROL Control-M module for the control of the machine parameters based on
viscosity, shrinkage and compression

Together with the digital BlueLine measuring amplifiers and interfaces FILLCONTROL provides a number of well-thought-out and very easy to use solutions for the monitoring, the switch control and the process control of the injection molding process.

Cost-Benefit-Analysis - on the cutting edge of technology 8/7/2012

Jomar Gears Model 20 Injection Blow Molding Machine to Developing Markets Based on High Quantities and Quality 4/20/2012

New Sinamics servo pump for hydraulic injection molding machines reduces energy costs by up to 50 percent 4/11/2012

New PRIAMUS connection technology - consistent, easy and safe! 3/31/2012

PRIAMUS FILLCONTROL: The Pinnacle of Process Management! 3/31/2012

From the small EOS to the giant Bi-Power 3/28/2012

New Process Cooling Remote Monitoring to Be Displayed at NPE2012 3/23/2012

Roboshot All-Electric to Demonstrate Precision, Efficiency Live at NPE2012 3/22/2012

Complete, All-Electric Packaging Cell Running in Milacron Booth at NPE2012 3/17/2012

Plastic Injection Machinery Exhibitions
	Hanoi Plas 2026 7/1/2026 - 7/4/2026 Hanoi, Vietnam
	AP-RubberPlas 2026 7/8/2026 - 7/11/2026 Qingdao, China
	MIMF - Malaysia International Machinery Fair 2026 7/16/2026 - 7/18/2026 Kuala Lumpur, Malaysia
	China Synthetic Resin Exhibition 2026 8/13/2026 - 8/15/2026 Wuxi, China
	Expoplast Peru Lima 2026 8/19/2026 - 8/22/2026 Lima, Peru
More Trade Shows