|
Rapid.Tech Science trade forum - Latest scientific findings for the innovations of tomorrow
4/13/2016 |
|
|
Erfurt, April 2016: There is still much potential for optimisation within the new technologies of Additive Manufacturing (AM) and 3D Printing. This ranges from design and development, processes and materials right through to the aftertreatment of components manufactured using AM. The Science trade forum at Rapid.Tech in Erfurt presents the latest findings from science and research as a basis for further developments and innovations. The international trade show and conference for Additive Manufacturing is among the world's foremost events in this field and will take place from 14 to 16 June 2016.
Additive Manufacturing (AM) and 3D Printing are two of the key technologies for more efficient, more sustainable and more flexible production across multiple industries. "To fully exploit the potential of these still technologies, the further development of existing solutions and innovations along the entire process chain are required", describes Professor Gerd Witt, Institute Director, Chair of Manufacturing Technology at the University of Duisburg-Essen, the demand for action. The long-standing member of Rapid.Tech's advisory board is in charge of the programme of the Science trade forum at the 13th Rapid.Tech in Erfurt on 14 and 15 June 2016. This conference area is the platform for scientists to present latest research and project results. "The forum enables scientists and employees from research and development departments to intensively exchange views on the current state of research and approaches to solutions, and to discuss their possible implementation in industry," adds Witt. The agenda of the two-day forum includes 14 peer-reviewed lectures which will be simultaneously translated (German<>English), like all presentations at the Rapid.Tech conference.
Presentation topics will include the increase of build-up rates with the material Ti6Al4V by high-power selective laser melting, and strategies to attain a constant volume build-up in Additive Manufacturing by using laser powder deposition welding. Also on the agenda are talks about the reduction in surface roughness of metal components manufactured using AM with the help of enhanced electrolytic smoothing, and the chemical aftertreatment of the surfaces of components manufactured from Ultem 9085. Machine-specific cost drivers in Additive Manufacturing using laser melting will also be discussed. One presentation will address the system dependency of optimal process parameter settings for laser sintering different thermoplastics. Another will illustrate actions and measures for optimising the geometric accuracy of laser-sintered components. The results of an examination of how powder influences the SLM process and the resulting product costs will be presented. There will also be a presentation on a model for optimising SLM processes, which considers indicators such as the quality of the whole process, process failures, adherence to the time schedule and powder waste, among other things. Using the example of a hub carrier, which was originally designed to be a cast component, the adaptation for selective laser melting by means of a design based on effective areas will be described. One contribution will discuss systematic component design for Additive Manufacturing according to the principles of bionics. New developments for the process-adjusted characterisation of the flow behaviour of powdery raw materials for beam melting processes will be presented and compared with established test methods. The programme includes an overview of different methods for the functionalisation of the gas phases of particular raw materials, the use of these methods for polymers and metals as well as the effects on the manufacturing process. One presentation will deal with the thermal and optical behaviour of powders which are functionalised with an additive for subsequent laser direct structuring (LDS) and are processed by means of selective laser sintering.
An in-depth professional exchange on specialist AM topics will be possible at the 13th Rapid.Tech, international trade show and conference for Additive Manufacturing, thanks not only to the well-established trade forums Design, Aviation, Tools, Medical Technology and "Dental Technology" and the User's Conference, but also the new conference areas of 3D Metal Printing, Additive Contract Manufacturing, Electronics and Automotive Industry. "With the expanded conference programme and the extended, three-day duration of Rapid.Tech, we are keeping abreast of the latest developments in Additive Manufacturing and 3D Printing," explains Wieland Kniffka, CEO of Messe Erfurt. The complete conference programme is available at www.rapidtech.de.
Thanks to its unique combination of trade show and specialist conference, Rapid.Tech in Erfurt is among the world's foremost events in the field of Additive Manufacturing and 3D Printing. For the fourth time FabCon 3.D, Germany's 3D Printing fair for semi-professional users and prosumers, will be held in parallel with the event. |
|
Related Exhibition:
|
|
|
 |
|
Rapid.Tech 2016
|
Trade fair and user's conference for Rapid Technology
6/14/2016 - 6/16/2016
Venue: Messe Erfurt, Erfurt, Germany
|
|
|
|
|
|
|
主站蜘蛛池模板：
日本欧洲亚洲高清在线|
在线视频中文字幕乱人伦|
日韩精品卡一卡二卡三卡四|
激情综合色五月丁香六月亚洲|
国产精品久免费的黄网站|
少妇特黄a一区二区三区|
久久天天躁狠狠躁夜夜婷|
老少配BBw性少配老|
在线综合 亚洲 欧美中文字幕|
91热在线精品国产一区|
69色堂|
久品精品一区二区|
国产视频深夜在线观看|
黄色不卡视频一区二区三区|
亚洲天堂网在线观看视频|
成年女人a毛片免费视频|
国产精品国产免费无码专区不卡|
亚洲欧美色综合影院|
99国产精品免费视频观看8|
日韩人妻少妇一区二区|
天天色欧美综合|
丁香婷婷在线观看|
精品国产人妻一区二区三区免费|
岛国一级|
精品国产18久久久久久|
国产一区二区三区亚洲精品|
www.黄|
日韩无码av一区二区三区|
欧美506070老妇乱子伦|
越南毛茸茸的少妇|
久久中文字幕久久久久91|
日韩精品国产二区三区|
狠狠干|
饶平县|
99中文在线精品
|
俺去啦中文网|
老熟女综合网|
日本久久精品一区二区三区|
国产亚洲精品成人av一区|
日韩电影精品|
亚洲欧洲免费在线在线看|
