|
EcoCVac by Dürr Ecoclean - innovative dry cleaning without compressed air
7/29/2015 |
|
|
Intermediate cleaning of powertrain parts with over 50% energy savings and high process reliability
Monschau/Germany, July 2015 - Machined powertrain components undergo intermediate cleaning to safeguard the quality of subsequent process steps. This is typically done by means of compressed air, which must be generated at a high expense of energy. With their new EcoCVac, Dürr Ecoclean offers an effective dry cleaning system that eliminates the need for compressed air. Apart from delivering enhanced process reliability, the system can provide energy savings of more than 50 percent. As maintenance of the working chamber is minimized, it also improves the machine availability.
Modern engine and transmission manufacturing lines are designed for maximum productivity and economic efficiency. Accordingly, any cause of interference with a downstream process must be eliminated. This makes it mandatory that engine and transmission parts such as, e.g., cylinder heads, engine blocks and transmission housings undergo cleaning operations between machining steps. Such intermediate cleaning is often performed by cleaning machines using compressed air. A benefit of this method is that the part is cleaned 'dry'. On the downside, however, generating the compressed air supply is very costly. Moreover, the chips and machining fluid residue adhering to the product are merely blown off - i.e., allowed to spread around in the work chamber, which will therefore become contaminated quickly. This, in turn, increases the risk of re-contamination of the product, with the possible result of impairing the next processing step.
Vacuum suction without compressed air in short cycles
With its innovative EcoCVac pre-cleaning and intermediate cleaning system, Dürr Ecoclean of Monschau/Germany has overcome these drawbacks. The equipment relies on the newly developed vacuum suction technology. This ensures that contaminants will be removed not just from the part but also from the work chamber within a mere 1.5 to 3 seconds of process time.
The EcoCVac system comprises a pressure vessel in which a vacuum is maintained permanently. This vessel is connected by a pipe to the vacuum chamber in which the part is placed. Once the chamber is closed, a powerful airflow is directed through it, thereby 'entraining' the chips sticking to the part and taking them into the vacuum vessel. A chip clean-out device integrated nearby separates chips and emulsion, allowing both to be discharged separately via a collecting bin and a flume, respectively.
More than 50 percent energy savings
In the development of the EcoCVac system, resource efficiency was a prime concern. As a result, the system affords a much-reduced energy consumption as compared to compressed-air type equipment. Assuming a compressed air consumption of 2.5 Nm3 per part at a price of 1.26 euro cents per Nm3, the cost of one compressed-air blowing cycle amounts to 3.15 euro cents per part. With the new vacuum dry cleaning process, an electric power input of 0.139 kWh per part is needed. At an estimated electricity price of 10.88 euro cents per kWh, power costs of 1.51 euro cents per part will thus be incurred. This is equal to a cost reduction by more than 50 percent.
Optimized process reliability and availability
In addition to the obvious cost benefits, the EcoCVac shines with its improved process reliability. As the chips are removed not only from the part but also from the work chamber, the risk of re-contamination is minimized. The chamber must hence be cleaned less often, and at a clearly reduced cost and effort. Moreover, unlike conventional compressed-air systems, there are no nozzles to be aligned relative to the part, e.g., during commissioning or after a collision. The system's availability rate is thus further improved. 
Photo: DE_EcoCVac_frontal
Dry cleaning without compressed air can yield energy savings of more than 50 percent in addition to process reliability gains.
Photo: DE_EcoCVac_Detail
The parts are cleaned in a vacuum chamber through which a powerful airflow is passed. This airflow not just reliably removes contaminants adhering to the part, but also conveys them out of the work chamber.
|
|
|
|
|
|
主站蜘蛛池模板：
日韩人妻无码精品久久久不卡|
超碰人人人|
九九视屏|
97人人爽|
韩国中文字幕一区二区|
国产中文字幕精品视频|
亚洲AV无码久久精品日韩|
99久久伊人精品综合观看|
99久久精品午夜一区二区|
欧美综合人人做人人爱|
后入内射无码人妻一区|
在线无码av一区二区三区|
精品视频在线观看免费观看|
精品人妻伦九区久久AAA片|
久久久WWW成人免费毛片|
丰满人妻一区二区三区高清精品|
天天躁夜夜躁天干天干2020|
无人区码一码二码w358cc|
高清欧美性猛交xxxx黑人猛交|
色欲人妻综合网站|
精品国产中文字幕在线|
超碰97人人操|
中文字幕第一区高清AV|
无码人妻一区二区三区线花季软件|
中文字幕人妻互换av久久|
亚洲精品成人a?v久久|
又黄又爽视频好爽视频|
99国精品午夜福利视频不卡99|
国产高清亚洲精品91|
永宁县|
亚洲色大成网站WWW久久|
亚洲天堂成人黄色在线播放|
婷婷五月综合色视频|
浮力影院欧美三级日本三级
|
国产成人无码AV在线播放动漫|
亚洲无码网|
亚洲午夜久久久久久噜噜噜|
九九成人免费视频|
亚洲AⅤ综合在线欧美一区|
曾医生17分钟??下载|
香蕉亚洲欧洲在线一区|
